• 6-Color Flexographic Printing Press
• Non-stop unwinding and rewinding
• Open chamber doctor blade system with auto-clean function
• Operation Control System for operating and controlling the printing units
• Remote-controlled anilox and printing cylinder change system
• Web inspection system with traversing camera for pinpoint fault detection
• Automatic viscosity control system
• 2 longitudinal slitters for reel trimming
• Web edge guiding system

Heating Type:

• Gas; hot air drying between printing units and tunnel dryer

Power Supply:

• 380 V, 50 Hz, 3-phase

Performance:

• Mechanical speed: 350 m/min
• Printing speed up to 300 m/min
• Web tension range: 500 – 1,900 N

Printing Tower / Dimensions:

• Paper width: min. 670 mm, max. 1700 mm
• Max. printing width: 1650 mm
• Gear pitch: 10 mm
• Nickel-chrome-coated, double-walled impression cylinder (Ø 1,925 mm)
• High-precision bearings

Inks: Water-based inks

Compressed Air Requirement:

• 6 bar
• Normal operation: approx. 150 NL/min
• During AutoClean: 2,800 NL/min

Print Repeat (Print Length):

• Min. 730 mm
• Max. 1,400 mm
• Plate thickness: 1.14 mm
• Max. screen ruling: 54 L/cm
• Printable substrates: paper from 30 g/m² to 450 g/m²

Storage & Accessories:

• 4 trolleys with 5 storage slots each for anilox rollers
• 3 trolleys with 3 storage slots each for printing cylinders

Anilox Roller Overview:

• 10 gears + 5 freewheels

Carrier Cylinders and Sleeve Lengths:
6 carrier cylinders each

Faults and Defects:

• Printing units 4 and 5 not working → CNC defective
• Web edge guiding before print unit defective → Quote from BST available (€1,142.40)
• Automatic viscosity control: touchscreen control panel defective → Quote from Agergaard available (€3,794.79)
• Web inspection computer (30Six) defective → Quote requested from Eltromat
• Cold compressed air dryer defective → Quote from Donaldson available (€3,657.15)
• Temperature control unit for cooling rollers defective – currently bypassed via 30Six temperature unit
• CNC control panel connection for printing units 1–3 defective
• Mounting machine (including 7 cameras) – monitor switching control defective → currently only one monitor operational
• Mounting machine for printing cylinders operated via overhead crane – cylinders stored on racks (6 per rack)
• Witech rewinder
• Peters unwinder and splicer
• Air conditioning unit in E-container defective → Quote from SK Kälte available (€2,888.05)