Bobst SP 102-BMA

Bobst SP 102-BMA

Información

Categoría

PP-62514

Troquelar

Fabricante

Bobst

Modelo

SP 102-BMA

Año

1987

Max. Formato

Min. Formato

Condición

Ubicación

Disponibilidad

720 × 1.020 mm

350 × 400 mm

Bien

Europa

Inmediatamente

Descripción

Machine type: Automatic hot-foil stamping, embossing and carton converting press
Maximum sheet size: 1,020 × 720 mm
Minimum sheet size: 400 × 350 mm
Maximum hot-foil stamping / embossing area: 1,010 × 680 mm
Maximum cutting die full size: 1,040 × 725 mm
Maximum die-cutting size with gripper margin: 1,020 × 705 mm
Maximum die-cutting size without gripper margin: 1,020 × 720 mm
Maximum pressure: 250 tons
Hot-foil stamping speed: up to 5,000 sheets/hour
Die-cutting speed: up to 7,500 sheets/hour
Paper: minimum approx. 80–90 g/m²
Board: up to 2,000 g/m²
Corrugated board: up to 4 mm
Gripper margin: 9–17 mm
Embossing die height: 6.35 / 7 mm
Cutting rule height: 23.8 mm
Adjustable platen temperature: 50–160 °C
Number of independently adjustable heating zones: 16
Maximum foil reel diameter: 250 mm
Foil reel hub diameter: 25–76 mm
Foil width: 25–1,010 mm
Number of foil advance shafts: 3
Programmable foil advance: up to 720 mm
Universal non-stop feeder
In-line pile preparation
Suction unit with multiple adjustments
4 adjustable front lays
Pull guide
Transport belts
Heated upper platen with 16 independent heating zones
Honeycomb chase system
BM Concept stamping plate
BM Concept compensating plate
Lateral foil guiding device
Motorized foil tension shaft with air cooling
Automatic platen pressure on/off device
Blower for sheet stabilization
Blower for foil release after stamping
Manual foil introduction device
Lateral foil removal system
Device for lengthwise slitting of foil
Foil break control system for 16 foils
BOBST electronic control system
3 individually motor-driven foil advance shafts
2 telescopic sliding rails for reel holders
2 reel-holder axles
2 additional reel holders for off-machine preparation
Non-stop delivery
Adjustable rear and side joggers
E-1 die-cutting chase
E-3 compensating plate
E-55 micrometric adjusting plate
E-98 thin cutting plate
Compatible with SP 102 Evoline
Maximum pallet size: 1,200 × 800 mm
Maximum feeder pile height: 1,820 mm
Maximum delivery pile height: 1,460 mm
Main motor power: 11 kW
Total connected load: 70 kVA
Net weight: approx. 18,000 kg
Gross weight: approx. 19,500 kg
Pneumatic air pressure: minimum 6 bar Document_001