Details

DMT BOPP – film line

Referenz ID
Kategorie
PP-3945
Extrusion
Hersteller
DMT
Modell
BOPP / BOPET
Jahr
1995
Max. Format
Bedingung
Ort
Verfügbarkeit
4200mm
Gut
Europa
Sofort
Share on facebook
Share on twitter
Share on linkedin
Share on xing
Share on telegram
Share on whatsapp

Beschreibung

  • Continuous Dosing System
    • Main Extrusion
    • 4 components
    • homopolymer 0 - 1000 kg/h
    • reclaim 0 - 300 kg/h
    • masterbatch A 0 - 150 kg/h
    • masterbatch B 0 - 60 kg/h
    • Main extruder mixing hopper:
    • Capacity : 1 m³
    • Mixing screw drive capacity : 2.2 kW
    • Rotation arm drive capacity : 0.37 kW
    • Construction : stainless steel - 304 L
    • Weighing device
    • Capacity : 1000 kg + dead weight of the hopper
    • Accuracy : ± 2 kg
  • Extrusion Line
    • Main Extruder 200 mm ( DAVIS STANDARD )
    • Maximum extruder output : 1060 kg / h
    • Screw diameter : 200mm
    • L / D ratio : 34
    • Number of water heating / cooling zones : 7
    • Total heating capacity : 231 kW
    • Drive Requirement : 490 kW by DC motor
    • Satellite extruder 50 mm ( DAVIS STANDARD )
    • Capacity : 45 kg/h
    • Diameter : 50 mm
    • L/D Ratio : 30
    • Number of barrel heating / cooling zones: 4
    • Drive capacity : 39,5 kW
    • Barrel heating capacity : 18 kW
    • Main filtration system
    • Type : Candles
    • Number of candles : 7
    • Number of Filter : 1 in operation
    • Filter heating : electrical
    • Heating capacity : approx. 8.4 kW
    • Satellite filters
    • Type : Screen changer
    • Diameter : 50 mm
    • Filter heating : electrical
    • Heating capacity : approx. 1.4 kW
    • Static Mixer
    • Die ( multi - layer die system )
    • Type of die : automatic die ( 22 bolts )
    • Die slot width : 650 mm approx.
    • Die slot opening : 2.1 - 4 mm
    • Heating capacity : 12 kW electrical
  • Casting Machine
    • Film width : 650 mm ( max )
    • Web Speed : 2 - 40 m/min
    • Chill roll diameter : 1400mm
    • Chill roll width : 900 mm
    • Chill roll surface fiinish : Hard chrome plated
    • Drive : 4.35 kw
    • ACCESSORIES
  • Machine Direction Orienter ( MDO )
    • Longitudinal Stretching machine
    • Working width : 650 mm
    • Preheating rolls Ø 600mm, chrome
    • Stretching rolls Ø 150mm, chrome
    • Anealing rolls Ø 600mm, chrome
    • Roll speed mechanical slow section : 2 - 50 m/min
    • Roll speed mechanical Fast section : 3 - 180 m/min
    • Nip rolls Ø 150mm
    • Drive : slow section 26 kW
    • fast section 66 kW
    • Heating type : oil boiler
    • Heating capacity : 30 kW for each preheating roll pair
    • 15 kW for each stretching roll pair
    • 30 kW for the heat setting roll pair
    • ACCESSORIES
  • Transverse Direction Orienter ( TDO )
    • Transverse Stretching machine, continuous chain track heavy duty
    • sliding chain and clips. Heated by oil. Galvanized carbon steel
    • air nozzles.
    • Working width :4000 - 4500 mm between clip face
    • Feed zone : 1.5 m
    • Preheating zone : 3 zone, 9 m
    • Stretching zone : 3 zone, 9 m
    • Heat Set zone : 3 zone, 9 m
    • Neutral zone : 1 m
    • Cooling zone : 2 m
    • Outlet zone : 1.5 m
    • 2 gear box size 200, one right, one left.
    • Drive : 109kW
    • ACCESSORIES
  • Pull Roll Stand ( PRS )
    • Working width 4400 mm before edge trims
    • Wautomatic edge trim cutting and conveying to the edge trim recycling system
    • Thickness gauge system with automatic die bolt control
    • Corona treatment on bottom side equipped with 1 x 10 fins station and
    • 1 x 20 kW generators
    • Corona treatment on top side equipped with 1 x 10 fins station and
    • 1 x 20 kW generators
    • Ozone exhaust system
    • Cooling rolls Ø 310mm, chrome
    • Guide rolls Ø 310mm, chrome
    • Treater rolls Ø 350mm, chrome
    • Press rolls Ø 310mm, rubber
    • Drive : 22kW
    • ACCESSORIES
  • Winder
    • Automatic two position turret winder
    • Working width 4200 mm after edge trims
    • Max. Roll diameter 800 mm
    • 4500mm core tube x 290 mm diameter
    • Core length 4500 mm
    • Roll transfer system automatic / tapeless
    • Tension control system high precision electronic gauge
    • Special low bending Contact roll Ø 175mm
    • Drive 2 x 11,5 kW winding, 6,7 kW turret.
    • ACCESSORIES
  • Edge Trim Recycling System
    • Two edge trim nozzles with cannection pipes and flexibles
    • Two edge trim suction fans with venturi, 7.5 kW 1500 m³/hr
    • One cyclone
    • Grinder 300 kg/hr for edge trim width 75 - 150 mm
    • Drive requirement 30 kW
    • One pneumatic transport fan, 18 kW, 1500 m³/hr
    • Connection pipes and flexibles
    • ACCESSORIES
  • Slitting Machine with electrical and pneumatic panels
    • Atlas CSE 820
    • Max. Rewind width 1500mm
    • Min. Rewind width 300mm
    • Max Rewind diameter 760mm
    • Max. Speed 600m/min
    • Number of rewind station 8
    • Electrical System
    • electrical equipment for resin supply
    • electrical equipment for stretching line
    • electrical equipment for winder
    • electrical equipment for drive system
    • Computerized process control system
    • automatic thickness control system
    • Variable speed drive group
    • Motor Control center
    • ACCESSORIES
  • Hot Oil Boiler
    • 1.250.000 kcal

Fragen?

Füllen Sie das Formular aus und unser Vertriebsteam wird sich mit Ihnen in Verbindung setzen.

Sie können uns auch per E-Mail oder per Telefon erreichen.

lion@pplion.com
+49 (0) 221 5894016

Andere Maschinen in der Kategorie Extrusion

Submit your Machine

Sign Up for our Newsletter

Please fill in the form below.

YouTube

Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von YouTube.
Mehr erfahren

Video laden

Maschine anbieten

YouTube

Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von YouTube.
Mehr erfahren

Video laden

Machine Information Request

Please fill in the form below to make an inquiry. Our Sales Team will get in touch with you!

Informationen Anfrage

Bitte füllen Sie das untenstehende Formular aus, um eine Anfrage zu stellen. Unser Vertriebsteam wird sich mit Ihnen in Verbindung setzen!

Melden Sie sich für unseren Newsletter an

Bitte füllen Sie das untenstehende Formular aus.